无X不贱--人贱极品

Please follow the steps below:

1. Connect the digital camera to your computer using a USB cable.
   
   
   
   
   

   Memo: - Be aware that you cannot return to the previous version once the firmware is updated. - Make sure that the battery level of the camera is sufficient. If not, use the AC adapter (not supplied). - Do not press the buttons on the digital camera, turn off the camera, or disconnect the USB cable from the camera during firmware update. - To update the firmware of your E-500, E-330 or E-300, please set your camera as follows before connecting your camera to your computer. - E-500 / E-330 : MENU > set up menu > USB MODE > STORAGE - E-300 : MENU > set up menu > PC MODE > STORAGE

   
   
   
2. From the [Online Service] menu in the [Browse] window, select [Update Camera].
   Please click [Online Service] button in the toolbar located at the top of the window, and select [Update Camera] from the pull-down menu.
   
   
   
   
   

   Tips: You can also select the [Online Service] menu from the [RAW Development], [Screen Saver], or [Movie Maker] window.

   
   
   
3. Follow the instructions on the screen to access the OLYMPUS server.
   When connected to the server, the [Update Camera] dialog box appears. Please click [OK] button.
   
   
   
   
   
   
4. From [Selecting device], select the device to be updated, and click the [Check for latest version] button.
   If the latest version of firmware is available for download, the list of firmware is displayed in the dialog box.
   
   
   
   
   
   
5. Select the firmware to be applied, and click [Update] button.
   
   
   
   
   
   

   Tips: If you want to check the contents of update before downloading, select the firmware to apply, and then click [Details]. A web browser launches, and the details about the firmware are displayed.

   
   
   
6. When the license agreement is displayed, read the license agreement, and click [Agree].
   The selected firmware is downloaded and transferred to the digital camera. Then, the digital camera performs the update.
   
   
   
7. When OK is displayed on the LCD display of the digital camera, as shown on the right in the dialg box below, updating the camera is complete. Click [Next].
   
   
   
   
   
   
8. Disconnect the USB cable connecting the digital camera and the computer.